An experiment is what this cuff is - but I won't say it's a failed experiment as I really love it. The theme was the ocean floor so I found a great thermal image of the ocean floor from space - etched the image into a copper cuff and then set out to add some patina to the piece. I had just read an article in "the Blue Issue" of
BeadStyle magazine for adding patina to copper - a blue patina at that, and I thought that would be just perfect for what I wanted to do. It is a bit involved but truly no more involved than etching the copper is. I followed all the instructions but as the instructions weren't very involved to begin with (just about 5 steps under two pictures)I am not sure if I messed up something or skipped something along the way. The patina is very definitely blue and though the color is very consistent along the piece, there are areas where there is no patina at all. I cleaned the piece thoroughly after taking it out of the etching solution - even went so far as to lightly scrub with a scotch
brite pad to make sure no oils or solution remained on the piece. I wore latex gloves when handling the copper and moving it from one step to the next, so how the bare spots came to be I do not know. BUT, I really love the color that came out on the copper and am definitely going to try this again. When it was dry and cleaned, I buffed it with some wax to preserve the patina color - although the patina seems to be really set on there.
Red Brass wrapped around the handle of my baby ball peen hammer with some copper tube cut to length to hide the join. Tool marks are very evident, I see!
Brass links joined with 3 copper rings.....now I just have to figure out what to make for a closure.
